Certificate Installation : Cisco ASA 5510
Posted by Comodo Technical Support - Sudharshan, Last modified by Comodo Technical Support - Sudharshan on December 14 2016 19:33

 

This document provides installation instructions for ASA 5510 that runs software version 8.0(2) and ASDM version 6.0(2).

Note 1: For Cisco ASDM 6.3 and 6.1, you must install the Root and Intermediate CA Certificates first before generating your RSA key.
Note 2: The root and intermediate certificates can be downloaded from the end of this article.

 

Step 1: Install the Comodo Root CA Certificate :


    1.    Within ASDM, click Configuration > Device Management.
    2.    Click Certificate Management > CA Certificates.
    3.    Click Add.
    4.    Click Paste certificate in PEM Format > paste the Root certificate (AddTrustExternalCARoot.crt) into the text field.
    5.    Click Install Certificate.
 
           A dialog box appears that confirms the installation was successful.

Step 2: Install the Comodo Intermediate CA bundle :

    1.    Within ASDM, click Configuration > Device Management.
    2.    Click Certificate Management > CA Certificates.
    3.    Click Add.
    4.    Click Paste certificate in PEM Format > paste the Intermediate CA bundle (comodo-sha-2-intermediates.ca-bundle) into the text field.
    5.    Click Install Certificate.
 
           A dialog box appears that confirms the installation was successful.


Step 3:
Install the SSL Certificate :

  1. Click Configuration > Device Management
  2. Click Certificate Management > Identity Certificates
  3. Select the identity certificate you created (The Expiry Date should display Pending)
  4. Click Install
  5. Click Paste the certificate data in base-64 format > paste the certificate (domain_com.crt) into the text field
  6. Click Install Certificate

    A dialog box appears that confirms the installation was successful.

 Step 6: Activate the newly installed SSL certificate for use:

  1. Click Configuration > Device Management
  2. Expand Advanced, and then expand SSL Settings
  3. Under Certificates, select the interface that is used to terminate WebVPN sessions
  4. Click Edit
  5. In the Certificate drop-down list, choose the certificate that you just installed
  6. Click OK
  7. Click Apply
  8. Your new certificate should now be activated for use with your ASA.
  9. Verify your installation with the COMODO SSL Analyzer.



ROOT AND INTERMEDIATES :

 

RELATED ARTICLES :

 

 

(0 vote(s))
Helpful
Not helpful

Comments (0)